New
Extension cord for 120V pump with regular non-locking plug (5-15R to L5-15P)
$32.95 USD
For use between 120V pumps with a regular non-locking plug and one of our Electric Brewery Control Panels. Industrial grade connector and plug instead of flimsy molded rubber that is easily damaged. Twist locking for safety. Max 125VAC, 15A. How...
Extension cord for 120V pump with twist lock plug (L5-15R to L5-15P)
$32.95 USD
For use between 120V pumps with a twist lock plug and one of our Electric Brewery Control Panels. Industrial grade connector and plug instead of flimsy molded rubber that is easily damaged. Twist locking for safety. Max 125VAC, 15A. How...
Chugger pump, stainless steel head, center inlet, 115V (CPSS-CI-1)
NOTE: Currently out of stock New stock on the way of NEW Chugger X-Dry with Run-Dry Protection, available around 2/15/19 Tough little continuous-duty pump that can be non-stop for extended periods. Handles liquids up to 250° F. Comes standard with...
Silicone temperature probe cap (water-resistant/splash-proof)
$2.99 USD
Want to protect your temperature probe kettle connections when rinsing your kettles? Add a water-resistant/splash-proof silicone temperature probe cap to stop water from getting into the connector when your cable is disconnected. Works on all of our temperature probes. Simply...
Temperature probe tip, 1/2" NPT, 6" probe length
$33.95 USD
Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). 6" long probe (measured from the back part of the threads). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our temperature...
Temperature probe tip, Tri-Clamp, 1.5" flange, 6"/150mm probe length
$39.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our...
March pump, stainless steel head, center inlet, 115V (815-SS-C)
$229.95 USD
Tough little continuous-duty pump that can be non-stop for extended periods. Handles liquids up to 250° F. Comes standard with a non-locking plug with a 6 foot long cord. To use with our control panels make sure to upgrade to the L5-15 (125VAC,...
30A terminal block, DIN rail mount
$0.75 USD
30A DIN rail mountable terminal block bus with 2 positions. Used to split out 24-10 gauge wiring on 30A and 50A control panels. Amperage Rating: 30AVoltage Rating: 600VWire Size: 24-10 AWGApprovals: UL (Recognized) Includes: (1) 30A terminal block End covers...
March pump, stainless steel head, center inlet, 230V (815-SS-C)
$229.95 USD
Tough little continuous-duty pump that can be non-stop for extended periods. Handles liquids up to 250° F. International version for 220-240V countries (United Kingdom, Australia, New Zealand, many parts of Europe, etc.). For more information see our FAQ: Adapting for 220-240V countries....
NEMA L6-15 (250VAC, 15A) twist lock electrical male plug
$11.95 USD
Used on 240V pump cables and plugs into our 240V only Electric Brewery Control Panels meant for international use. Industrial grade and twist locking for safety. 3 wire. Need to extend your pump cord length? Use one of our pre-assembled extension cords....
30A terminal block jumper
$0.50 USD
Jumper for all 30A DIN rail mountable terminal block buses. Amperage Rating: 30AVoltage Rating: 600VApprovals: UL (Recognized) 30A terminal block, 30A terminal block, 2 level and 30A terminal block, 2 level, feed through are available for order separately. Used in our pre-assembled 50A control panels....
65A terminal block cover
$0.50 USD
Protective/warning cover for 65A terminal blocks. 65A dual terminal blocks and 65A triple terminal blocks are available for order separately. Used in our pre-assembled 50A control panels.
65A triple terminal block, DIN rail mount
$6.99 USD
65A DIN rail mountable terminal block bus with 6 positions. Used to split out 6 gauge wiring on 50A control panels (namely to distribute the red 6 gauge to each breaker). Amperage Rating: 65AVoltage Rating: 600VWire Size: 18-6 AWGApprovals: UL...
Extension cord for 240V pump with twist lock plug (L6-15R to L6-15P)
$32.95 USD
For use between 240V pumps with a twist lock plug and one of our 240V only Electric Brewery Control Panels meant for international use. Industrial grade connector and plug instead of flimsy molded rubber that is easily damaged. Twist locking for...
NEMA 5-15 (125VAC, 15A) electrical female connector
$9.95 USD
Don't want to cut the plug off your 120V pump and void the warranty? Make a patch cord to connect your pump to our control panels by using this connector with our NEMA L5-15 (125VAC, 15A) twist lock electrical male plug...
Chugger Mini Max TEFC pump, stainless steel head, center inlet, 115/230V (TCPSS-CI)
$189.95 USD
Tough little continuous-duty pump that can be non-stop for extended periods. Handles liquids up to 250° F and has a TEFC (Totally Enclosed Fan Cooled) dual voltage motor (user selectable 115VAC and 230VAC). Consider this pump over the other models primarily...
Chugger pump, stainless steel head, center inlet, 230V (CPSS-CI-2)
$149.95 USD
Tough little continuous-duty pump that can be non-stop for extended periods. Handles liquids up to 250° F. International version for 220-240V countries (United Kingdom, Australia, New Zealand, many parts of Europe, etc.). For more information see our FAQ: Adapting for...
30A terminal block end cover
$0.50 USD
End cover for 30A DIN rail mountable terminal block bus with a single level. Required at the end of a terminal block row when the size or component changes to cover the open side of the terminal block. Approvals: UL...
DIN rail stopper (screw)
$1.25 USD
DIN rail stoppers are used for preventing DIN rail devices from sliding. Two are required, one on each end of the DIN rail. 6mm wide. For 35mm DIN Rail.This version uses a screw to secure the end stop in place. Used...
The Complete Guide to Building Your Brewery
An electronic book version of the build instructions on our website perfect for reading offline, printing, or just having a complete backup. Available for immediate download - no waiting! Over 380 pages of detailed step by step instructions with hundreds...
Hop Stopper 2.0 Keg Edition (COMING SOON!)
COMING SOON! (and no, they won't be free 😉) The ultimate filter for your corny kegs. Perfect for heavily dry hopped IPAs, DIPAs, and NEIPAs. No more blocked or clogged dip tubes! Add hops, fruit, or anything else you can...
Hop Stopper 2.0 XL with 1/2" OD custom dip tube and 1/2" NPT connector (for misc kettles larger than 30 gallons)
For boil kettles larger than 30 gallons in size. We supply a 1/2" outer diameter (OD) custom dip tube and 1/2" NPT connector. What NPT fitting does your kettle have? My kettle has a 1/2" NPT male fitting My kettle has...
Hop Stopper 2.0 XL with 1/2" OD custom dip tube (for misc kettles larger than 30 gallons)
For boil kettles larger than 30 gallons in size. We supply a 1/2" outer diameter (OD) custom dip tube. Vertical height of kettle outlet, in inches (more info) Shipping: For USA 2-5 day USPS standard domestic with tracking is used. For...
Hop Stopper 2.0 XL screen only (for misc kettles larger than 30 gallons)
For boil kettles larger than 30 gallons in size. Screen only. You supply the 1/2" or 5/8" outer diameter (OD) dip tube. Please note that your dip tube needs to be notched to work correctly with the Hop Stopper. See...
Hop Stopper 2.0 with 1/2" OD custom dip tube and 1/2" NPT connector (for misc kettles up to 30 gallons)
For boil kettles up to 30 gallons in size. We supply a 1/2" outer diameter (OD) custom dip tube and 1/2" NPT connector. What NPT fitting does your kettle have? My kettle has a 1/2" NPT male fitting My kettle has...
Hop Stopper 2.0 with 1/2" OD custom dip tube (for misc kettles up to 30 gallons)
For boil kettles up to 30 gallons in size. We supply a 1/2" outer diameter (OD) custom dip tube. Vertical height of kettle outlet, in inches (more info) Shipping: For USA 2-5 day USPS standard domestic with tracking is used. For...
Hop Stopper 2.0 screen only (for misc kettles up to 30 gallons)
For boil kettles up to 30 gallons in size. Screen only. You supply the 1/2" or 5/8" outer diameter dip tube. Please note that your dip tube needs to be notched to work correctly with the Hop Stopper. See the user's...
Hop Stopper 2.0 with 1/2" OD custom dip tube and NPT connector (for converted Sanke kegs/keggles)
For converted 15 gallon Sanke kegs (keggles). We supply a 1/2" outer diameter (OD) custom dip tube and 1/2" NPT connector. What NPT fitting does your keggle have? My keggle has a 1/2" NPT male fitting My keggle has a 1/2"...
Hop Stopper 2.0 with 1/2" OD custom dip tube (for converted Sanke kegs/keggles)
For converted 15 gallon Sanke kegs (keggles). We supply a 1/2" outer diameter (OD) custom dip tube. Vertical height of keggle outlet, in inches (more info) Shipping: For USA 2-5 day USPS standard domestic with tracking is used. For International 3-4...
Hop Stopper 2.0 screen only (for converted Sanke kegs/keggles)
For converted 15 gallon Sanke kegs (keggles). Screen only. You supply the 1/2" or 5/8" outer diameter dip tube. Please note that your dip tube needs to be notched to work correctly with the Hop Stopper. See the user's manual for...
Hop Stopper 2.0 XL with custom dip tube (for non-BME SS Brewtech kettles larger than 30 gallons)
For SS Brewtech (non-BME version) boil kettles larger than 30 gallons in size. We supply the custom dip tube that slides right in to the kettle fitting, no tools required. Keep your existing dip tube with trub dam as a...
Hop Stopper 2.0 with custom dip tube (for non-BME SS Brewtech kettles up to 30 gallons)
For SS Brewtech (non-BME version) boil kettles up to 30 gallons in size. We supply the custom dip tube that slides right in to the kettle fitting, no tools required. Keep your existing dip tube with trub dam as a...
