Parts
Want to build something custom? Use the same quality parts that we use in our Control Panels, Heating Element Assemblies, and Temperature Probes.
Silicone adhesive/sealant (1 oz)
$2.99 USD
1oz tube of RTV Silicone Sealant. Used to provide watertight seal of the panel meters and heat sink to the control panel enclosure. This silicone sealant is NOT food safe! Included in our Electric Brewery Control Panel kits.
Standard 30A Electric Brewery Control Panel (DIY Kit)
$1,695.00 USD
Our most popular control panel! Perfect for producing up to 20 gallons of finished product per batch. DIY kit. You supply the tools. A single element is used in both the boil kettle and hot liquor tank. The control panel...
Standard 30A Electric Brewery Control Panel (DIY Kit, 240V only, for international use)
$1,695.00 USD
Our standard control panel for producing up to 20 gallons of finished product per batch. DIY kit. You supply the tools. International version for 220-240V countries (United Kingdom, Australia, New Zealand, many parts of Europe, etc.). For more information see...
50A Electric Brewery Control Panel for 30+ gallons (DIY Kit)
$2,145.00 USD
Our control panel for producing more than 30 gallons of finished product per batch or to speed up your brew day by reducing heat times. DIY Kit. You supply the tools. Perfect for 1-3 bbl pilot systems. For more information see...
50A Electric Brewery Control Panel for 30+ gallons (DIY Kit, 240V only, for international use)
$2,145.00 USD
Our control panel for producing more than 30 gallons of finished product per batch or to speed up your brew day by reducing heat times. DIY Kit. You supply the tools. Perfect for 1-3 bbl pilot systems. International version for...
50A Electric Brewery Control Panel for back to back batches (DIY Kit)
$1,845.00 USD
Our control panel for producing up to 20 gallons of finished product per batch, back to back. DIY kit. You supply the tools. A single element is used in the boil kettle and hot liquor tank, but both may be...
50A Electric Brewery Control Panel for back to back batches (DIY Kit, 240V only, for international use)
$1,845.00 USD
Our control panel for producing up to 20 gallons of finished product per batch, back to back. DIY kit. You supply the tools. International version for 220-240V countries (United Kingdom, Australia, New Zealand, many parts of Europe, etc.). For more information...
30A Electric Brewery Control Panel power cord (Pre-Assembled)
$94.95 USD
30A power cord for powering our 30A control panels. It plugs into a standard 4-slot North American dryer wall receptacle (240V/30A NEMA 14-30R with ground). A locking female connector is used on the control panel side for added safety. 10 feet in length. Contact us...
30A Electric Brewery Control Panel power cord (DIY Kit)
$84.95 USD
30A power cord for powering our 30A control panels. It plugs into a standard 4-slot North American dryer wall receptacle (240V/30A NEMA 14-30R with ground). DIY Kit (4 wires must be attached between the cord and plug using a screwdriver). A locking female connector is used...
50A Electric Brewery Control Panel power cord (Pre-Assembled)
$159.95 USD
50A power cord for powering any of our 50A control panels. It plugs into a standard 4-slot North American stove wall receptacle (240V/50A NEMA 14-50R with ground). A locking female connector is used on the control panel side for added safety. Conductors are...
50A Electric Brewery Control Panel power cord (DIY Kit)
$149.95 USD
50A power cord for powering any of our 50A control panels. It plugs into a standard 4-slot North American stove wall receptacle (240V/50A NEMA 14-50R with ground). DIY Kit (4 wires must be attached between the cord and plug using a screwdriver). A locking female...
Electric Brewery temperature probe, 1/2" NPT, 1.5" probe length (DIY Kit)
$57.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). The 1.5" long probe (measured from the back part of the threads to the probe tip) can be screwed...
Electric Brewery temperature probe, 1/4" NPT, 2" probe length (DIY Kit)
$58.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Mounts into 1/4" NPT thread (as well as 1/4" BSPP and BSPT). Simply wrap the threads with telfon tape and screw in to fasten. Includes two layers of sleeving,...
Electric Brewery temperature probe, M14x1.5 Metric, 2" probe length (DIY Kit)
$60.95 USD
Metric (straight) thread probes are normally used directly in a kettle wall such as the Boil Kettle, resulting in a weldless installation. Simply punch a hole in your kettle wall and attach using the included stainless steel nut and silicone washer. 2" long probe...
Electric Brewery temperature probe, 1.5" Tri-Clamp (DIY Kit)
$68.95 USD
Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Includes two layers of sleeving, a stainless steel wire rope with 150lb break strength, and high quality 3:1 ratio heat shrink...
Electric Brewery temperature probe, 2" Tri-Clamp (DIY Kit)
$72.95 USD
Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Includes two layers of sleeving, a stainless steel wire rope with 150lb break strength, and high quality 3:1 ratio heat shrink...
Electric Brewery temperature probe cable only (Pre-Assembled)
$48.00 USD
These cables are pre-assembled and come with a 3-pin disconnect at the probe end and a 3-pin female XLR connector at the control panel end. Includes two layers of sleeving, a stainless steel wire rope with 150lb break strength, and high...
Temperature probe tip, 1/2" NPT for thermowell
$29.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). Tip/wire length is 6.7" long, intended for use in a...
Temperature probe tip, 1/2" NPT, 1.5" probe length
$28.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). The 1.5" long probe (measured from the back part of the threads...
Temperature probe tip, 1/2" NPT, 2.5" probe length
$30.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). 2.5" long probe (measured from the back part of the threads to...
Temperature probe tip, 1/2" NPT, 4" probe length
$33.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). 4" long probe (measured from the back part of the threads...
Temperature probe tip, 1/4" NPT, 2" probe length
$29.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/4" NPT thread (as well as 1/4" BSPP and BSPT). 2" long probe (measured from the back part of the threads to the...
Temperature probe tip, 1/4" NPT, 4" probe length
$32.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/4" NPT thread (as well as 1/4" BSPP and BSPT). 4" long probe (measured from the back part of the threads to the...
Temperature probe tip, 1/2" NPT, 6" probe length
$33.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). 6" long probe (measured from the back part of the threads...
Temperature probe tip, M14x1.5 Metric, 2" probe length
$31.95 USD
Stainless steel probe body. Metric (straight) thread probes are normally used directly in a kettle wall such as the Boil Kettle, resulting in a weldless installation. Simply punch a hole in your kettle wall and attach using the included stainless steel nut...
Temperature probe tip, 1.5" Tri-Clamp, 1.38"/35mm probe length
$39.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). The 1.38" (35mm) long probe can be attached directly into an instrument (not standard or...
Temperature probe tip, 1.5" Tri-Clamp, 2.36"/60mm probe length
$39.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). The 2.36" (60mm) long probe can be attached directly into a standard or full (not instrument)...
Temperature probe tip, 1.5" Tri-Clamp, 6"/150mm probe length
$42.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our...
Temperature probe tip, 1.5" Tri-Clamp, 8"/200mm probe length
$44.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our...
Temperature probe tip, 2" Tri-Clamp, 6"/150mm probe length
$43.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our...
Temperature probe tip, 2" Tri-Clamp, 8"/200mm probe length
$45.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our...
Silicone temperature probe cap (water-resistant/splash-proof)
$3.49 USD
Want to protect your temperature probe kettle connections when rinsing your kettles? Add a water-resistant/splash-proof silicone temperature probe cap to stop water from getting into the connector when your cable is disconnected. Works on all of our temperature probes. Simply...
Temperature probe wire with locking connector, 3-conductor, Teflon™ coated
$12.95 USD
Bare 3-conductor temperature probe wire with 3-pin locking connector. Offered in 3 lengths (6', 8', and 12'). Teflon™ coated wire is rated to 400F. Already included in our temperature probe kits. Contact us for custom lengths. Does this cable work...
Temperature probe wire, bare, 3-conductor, Teflon™ coated (Sold by the foot)
$1.49 USD
3-conductor 24 gauge copper wire coated with Teflon™ can be used for RTD probe extensions or making your own cables. Rated to 400F. Price is per foot.
Electric Brewery temperature probe cable only (DIY Kit)
$29.00 USD
These cables include a 3-pin disconnect at the probe end and a female XLR connector at the control panel end. Includes two layers of sleeving, a stainless steel wire rope, and high quality 3:1 ratio heat shrink tubing for ultimate protection. Detachable for easy...
Stainless steel ball valve 1/2" NPT full port
$13.95 USD
1/2" NPT female input and output. Can be disassembled using two wrenches for cleaning. Suitable for fluid temperatures between -20 to 450 degrees F, and pressures up to 1000 PSI. A full port (also known as full bore) ball valve has...
Stainless steel bi-metal thermometer, 1/2" NPT male, 2.5" probe
$19.95 USD
We use this thermometer on the output side of the counterflow chiller so that we can monitor the temperature of the cooled wort. For more information see our Wort Chiller guide. Can also be used on any kettle that has a 1/2"...
Stainless steel tee, 1/2" NPT female
$3.95 USD
Perfect for adding a 1/2" NPT Electric Brewery temperature probe in-line with the flow. 1/2" Female National Pipe Thread on all three openings. 2" length x 1.5" width. 304 Stainless, class 150.
Stainless steel 1/2" NPT lock nut
$3.95 USD
These lock nuts have a recessed grove on the inside into which the o-ring fits partially to avoid being overly compressed when the lock nut is tightened. 304 Stainless.
Stainless steel locknut, 1" NPS
$12.95 USD
Fits on heating element threads. Included in our Electric Brewery heating element assemblies (both pre-assembled and DIY kit).
Stainless steel 1/2" NPT female x 1/2" barb fitting
$4.95 USD
Use these together with our Stainless steel female quick disconnect x 1/2" NPT male fitting to finish the ends of your hoses. We opted to use two pieces as adding the barbed fitting makes the solid ends of the hose a bit...
Stainless steel female quick disconnect x 1/2" NPT male
$15.95 USD
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. Mates with the male end to form a locking seal. The...
Stainless steel female quick disconnect x 1/2" barb
$15.95 USD
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. Mates with the male end to form a locking seal. The...
Stainless steel male quick disconnect x 1/2" NPT male
$10.95 USD
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. The male end is simply a post with a locking groove...
Stainless steel male quick disconnect x 1.5" Tri-Clamp
$12.95 USD
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. The male end is simply a post with a...
Stainless steel coupler 3/4" NPT female x 1/2" NPT female
$3.95 USD
Use on pumps with 3/4" NPT inlets to reduce the size to 1/2" NPT. Larger input pumps are easier to prime. 304 Stainless.
Stainless steel street elbow 1/2" NPT female x 1/2" NPT male
$3.95 USD
1/2" NPT female thread on one end, 1/2" NPT male on the other. Want to waste half an hour? Try and figure out why these are called 'street' fittings. 304 Stainless, class 150.
Stainless steel elbow 1/2" NPT female x 1/2" NPT female
$2.99 USD
1/2" NPT female thread on both ends. 304 Stainless, class 150.
Stainless steel 1/2" compression x 1/2" NPT female fitting
$22.95 USD
1/2" Compression x 1/2" NPT female fitting. Used to attach the HERMS coil to your kettle. 304 Stainless.
Stainless steel 1/2" compression x 1/2" NPT male fitting
$16.95 USD
Used on the Hot Liquor Tank water return. May also be used to attach a HERMS coil to a kettle with female 1/2" NPT couplers. 304 Stainless.
