Wiring
Standard 30A Electric Brewery Control Panel Wiring Kit
$99.95 USD
This kit is intended for someone who wants to source all of the major control panel parts themselves but is having difficulty finding these smaller parts. It includes everything you need to wire up your Standard 30A Electric Brewery Control...
Double ratcheting wire crimper
$34.95 USD
Used to attach spade and ring terminals to wires. These crimp in two spots at once which saves time and creates a better connection as they apply force continuously and evenly. Crimps 22-18, 16-14, and 12-10 gauge sizes (insulated)
Self-adjusting wire stripper
Self-adjusting automatic wire stripper with cutter. Works with single conductor 10 to 24 gauge wires.
1/4" black heat shrink tubing, 2:1 shrink ratio (Sold by the foot)
$0.50 USD
Included in our Electric Brewery temperature probe kits. Price is per foot.
3/8" black heat shrink tubing, 2:1 shrink ratio (Sold by the foot)
$0.50 USD
Used in our pre-assembled temperature probes as a final 2" piece outside the other two pieces of heat shrink tubing, for a night tight finish. Included in our Electric Brewery temperature probe kits. Price is per foot.
3/4" black heat shrink tubing, 2:1 shrink ratio (Sold by the foot)
$0.75 USD
Included in our Electric Brewery heating element assembly (DIY kit). Price is per foot.
3/4" black heat shrink tubing, 3:1 shrink ratio (Sold by the foot)
$1.50 USD
Replaces the 5/8" black heat shrink tubing in our temperature probe build instructions. 3:1 heatshrink tubing works better than 2:1 as it can fit over the factory end of the probe. Typical starting diameter is 18mm, or about 3/4". Included in our Electric Brewery...
Stainless steel wire rope, 1x7 strand, 1/32" diameter, 150 pound break strength (Sold by the foot)
$0.75 USD
Adds protection to smaller diameter wiring. Included in our Electric Brewery temperature probe kits. Price is per foot.
1/8" expandable braided sleeving (Sold by the foot)
$0.30 USD
Perfect for protecting 24 gauge temperature probe wire and other smaller wiring. It is recommended that you purchase 20% more than the cord length you wish to cover to account for shrinking during installation. Included in our Electric Brewery temperature probe kits....
1/4" expandable braided sleeving, carbon/black (Sold by the foot)
$0.40 USD
Perfect for protecting 14 gauge SJEOOW wire such as pump cords. It is recommended that you purchase 20% more than the cord length you wish to cover to account for shrinking during installation. Price is per foot.
1/2" expandable braided sleeving, carbon/black (Sold by the foot)
$0.50 USD
Perfect for protecting 10 gauge SJEOOW wire used as heating element cord. It is recommended that you purchase 30% more than the cord length you wish to cover to account for shrinking during installation. Included in our Electric Brewery heating element...
1/2" spiral wire wrap (Sold by the foot)
$0.95 USD
1/2 inch polyethylene expandable spiral cut wrap used to protect wire, hose or cable bundles from 3/8 inch to 4 inch diameter. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is...
Small nylon cable tie (100 pack)
$1.99 USD
4" (75-100mm) long nylon cable ties that are approximately 0.08" (2mm) wide. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Package of 100
Self-adhesive tie mount (50 pack)
$5.95 USD
3/4" Self-adhesive cable tie mount. Industrial grade, will not dry out over time, causing the mount to detach. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Package of 50
50A ground bar, 7 terminal
$16.95 USD
7-terminal ground bar bus for easier grounding of components. Mounts with (2) 8-32 screws (included) to backplate of enclosure. Included in our Electric Brewery Control Panel kits.
50A power distribution block
$49.95 USD
Open terminal block, 175A, 1-pole. Panel mount. UL 1059 recognized. Includes cover. Line side: 1 opening accepts 2/0 gauge to 8 gauge wire.Load side: 4 openings accept 4 gauge to 14 gauge wire. Allows you to split a large gauge wire that needs...
Terminal strip, 8 position
$6.95 USD
8 Position dual row terminal strip, 20A/300V. Want to save some wiring work? Use a terminal strip jumper. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit.
Terminal strip jumper, 8 position
$3.95 USD
8-position terminal strip jumper. Connects all 8 positions of the panel mount terminal strip to reduce wiring. (Terminal strip not included). Included in our Electric Brewery Control Panel kits.
22 gauge 2-conductor wire (Sold by the foot)
$0.50 USD
Perfect for wiring up the meters, power supplies, SSRs, and other locations where two small gauge conductors are required. Price is per foot.
22 gauge 4-conductor wire (Sold by the foot)
$0.75 USD
Perfect for wiring up the XLR receptacles and other locations where more than two small gauge conductors are required. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
White 14 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
$0.35 USD
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
Black 14 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
$0.35 USD
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
Red 14 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
$0.35 USD
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
White 10 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
$0.75 USD
Included in our Electric Brewery Control Panel kits (240V only, for international use). Price is per foot.
Black 10 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
$0.75 USD
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
Red 10 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
$0.75 USD
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
Green 10 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
$0.75 USD
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
Black 6 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
$1.95 USD
Included in our Electric Brewery Control Panel kits. Price is per foot.
Red 6 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
$1.95 USD
Included in our Electric Brewery Control Panel kits. Price is per foot.
Green 6 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
$1.95 USD
Included in our Electric Brewery Control Panel kits. Price is per foot.
Premium SJEOOW 14 gauge 3-conductor wire, oil/water resistant, rubber coating, rated for outdoor use (Sold by the foot)
$2.49 USD
Perfect for pump cords. SJEOOW wire features a thermoplastic elastomer jacket which means that the cable remains more flexible than a standard (less expensive) cord. Rated to 300 volts and from -50 to 105 degrees Celsius. These cords are designed...
Premium SJEOOW 10 gauge 3-conductor wire, oil/water resistant, rubber coating, rated for outdoor use (Sold by the foot)
$4.49 USD
Perfect for heating element cords or for 30A control panel power cords. SJEOOW wire features a thermoplastic elastomer jacket which means that the cable remains more flexible than a standard (less expensive) cord. Rated to 300 volts and from -50 to...
22-18 gauge #6 narrow spade terminal, red (25 pack)
$5.99 USD
Spade terminal, vinyl insulated, accepts 22-18 gauge wire, for #6 stud. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Package of 25
22 gauge female quick disconnect terminal, red (10 pack)
$9.95 USD
Fully insulated quick-disconnect terminal standard female, accepts 18-22 wire gauge. Used for connecting 18-22 gauge wires to 50A contactors (such as the volt meter signal in 50A panels). Included in our Electric Brewery Control Panel kits. Package of 10
16-14 gauge #6 narrow spade terminal, blue (25 pack)
$5.95 USD
Spade terminal, vinyl Insulated, accepts 16-14 wire gauge, for #6 stud. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Package of 25
14 gauge ring terminal, blue (10 pack)
$5.49 USD
Ring terminal vinyl insulated, accepts 16-14 wire gauge, for #10 stud, 600V. Use rings in the place of spades on connections that you do not want to come undone (14 gauge fuse wire from shunt, hot and neutral supply to...
16-14 gauge female quick disconnect terminal, blue (25 pack)
$18.95 USD
Fully insulated quick-disconnect terminal standard female, accepts 16-14 wire gauge. Used in 50A control panels to connect to the coil on 50A contactors. Included in our Electric Brewery Control Panel kits. Package of 25
10 gauge ring terminal, 1/4" hole, yellow (10 pack)
$4.49 USD
Ring terminal, vinyl insulated, accepts 12-10 Wire Gauge, for 1/4" stud. Used to connect 10 gauge ground wires to ground stud within control panels. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Package of...
10 gauge ring terminal, #10 hole, yellow (25 pack)
$8.99 USD
Ring terminal, vinyl insulated, accepts 12-10 wire gauge, for #10 stud. Used on all 10 gauge screw connections. For connecting to ground stud within control panels use 10 gauge ring terminal, #14 hole instead. Included in our Electric Brewery Control Panel kits, Standard...
6 gauge ring terminal, 1/4" hole (10 pack)
$9.99 USD
6 gauge ring terminal with a 1/4" hole, uninsulated. Used to connect 6 gauge wire to ground posts inside the control panel. For connecting wires to the shunt, SSRs, and other small screws, use 6 gauge ring terminal, #10 hole...
6 gauge ring terminal, #10 hole (10 pack)
$8.49 USD
6 gauge ring terminal with a #10 hole, uninsulated. Used to connect 6 gauge wire to shunt, SSRs, and other small screws. For connecting ground wire to panel stud, use 6 gauge ring terminal, #14 hole instead. Package of 10
22 gauge wire ferrule (10 pack)
$2.49 USD
22 Gauge wire ferrule for use in DIN style wiring. Fits (1) 22 gauge wire, ferrule length of .39". Requires special DIN wire ferrule crimping tool. Package of 10
14 gauge wire ferrule, blue (25 pack)
$1.49 USD
14 Gauge wire ferrule for use in DIN style wiring. Fits (1) 14 gauge wire, ferrule length of .31". Requires special DIN wire ferrule crimping tool. Package of 25
14 gauge x 2 wire ferrule, blue (25 pack)
$3.95 USD
Dual 14 gauge wire ferrule for use in DIN style wiring. Fits (2) 14 gauge wires, ferrule length of .39". Requires special DIN wire ferrule crimping tool. Package of 25
10 gauge wire ferrule, yellow (25 pack)
$3.95 USD
10 Gauge wire ferrule for use in DIN style wiring. Fits (1) 10 gauge wire, ferrule length of .47". Requires special DIN wire ferrule crimping tool. Package of 25
10 gauge x 2 wire ferrule, yellow (10 pack)
$2.95 USD
Dual 10 gauge wire ferrule for use in DIN style wiring. Fits (2) 10 gauge wires, ferrule length of .47". Requires special DIN wire ferrule crimping tool. Package of 10
6 gauge wire ferrule, blue (10 pack)
$2.49 USD
6 Gauge wire ferrule for use in DIN style wiring. Fits (1) 6 gauge wire, ferrule length of .47". Requires special DIN wire ferrule crimping tool. Package of 10
Electric Brewery heating element cord and plug assembly (250VAC, 30A)
$79.95 USD
Want to DIY but save a few steps? Use this pre-assembled heating element cord assembly. Features durable SJEOOW wire protected with expandable sleeving, with a tough industrial grade nylon L6-30 locking plug, and heat shrink tubing on the plug end. You supply...
Standard straight cord/wire grip, 3/4" NPT
$24.95 USD
For cord diameter .63" to 0.75", aluminum, -30F to +225F. Included in our Electric Brewery heating element assembly (DIY kit).
Silicone adhesive/sealant (1 oz)
$2.99 USD
1oz tube of RTV Silicone Sealant. Used to provide watertight seal of the panel meters and heat sink to the control panel enclosure. This silicone sealant is NOT food safe! Included in our Electric Brewery Control Panel kits.
