Heating Elements & Parts
Our heating element assemblies feature UL/CSA listed industrial non-proprietary parts, a weatherproof box (boilover proof), and are simple to install.
We only use premium 804 stainless steel Camco heating elements specifically made for brewing. These grey elements are stronger, lighter and more corrosion resistant than shiny 304/316 stainless steel elements. Unlike most other elements, ours also include a stainless base that will not rust. Cords are made from durable SJEOOW wire protected with expandable sleeving, with a tough industrial grade nylon locking plug for safety (not a cheap molded rubber plug that deforms / melts when overheated). Suitable for use anywhere in the world.
Assemblies can be added to any kettle or vessel without holes, or ones that already have NPS or Tri-Clamp (Tri-Clover) fittings.
See our Electric Brewery heating element build instructions to build your own.
Electric Brewery heating element assembly (Pre-Assembled, optional Tri-Clamp)
$194.95 USD
BLACK FRIDAY SALE! Use coupon code SAVE10 at checkout and save 10% until Dec 2.Our heating element assemblies feature UL/CSA listed industrial non-proprietary parts, a weatherproof box (boilover proof), and are simple to install. The heating element is optional as...
Electric Brewery heating element assembly (DIY Kit, optional Tri-Clamp)
$144.95 USD
Our heating element assemblies feature UL/CSA listed industrial non-proprietary parts, a weatherproof box (boilover proof), and are simple to install. The heating element is optional as some people may already have one and/or purchased one separately. If you do not...
Electric Brewery heating element cord and plug assembly (250VAC, 30A)
$79.95 USD
Want to DIY but save a few steps? Use this pre-assembled heating element cord assembly. Features durable SJEOOW wire protected with expandable sleeving, with a tough industrial grade nylon L6-30 locking plug, and heat shrink tubing on the plug end. You supply...
Camco 02965 stainless steel heating element, 5500W, ripple ULWD (optional Tri-Clamp)
$49.95 USD
These premium 804 stainless steel Camco heating elements are specifically made for brewing. They are stronger, lighter and more corrosion resistant than shiny 304/316 stainless steel elements. Unlike most other elements, ours also include a stainless base that will not...
Camco 02955 stainless steel heating element, 4500W, ripple ULWD (optional Tri-Clamp)
$49.95 USD
These premium 804 stainless steel Camco heating elements are specifically made for brewing. They are stronger, lighter and more corrosion resistant than shiny 304/316 stainless steel elements. Unlike most other elements, ours also include a stainless base that will not...
Weatherproof 2-gang outlet box with 3/4" NPT access holes
$23.95 USD
Dual gang electrical box with (3) 3/4 NPT holes for use in building heating element boxes. Includes (2) plastic caps for covering empty 3/4" NPT holes. Covers sold separately. Included in our Electric Brewery heating element assembly (DIY kit).
Weatherproof 2-gang blank cover with gasket
$4.95 USD
2-gang blank cover for electrical boxes. Comes with gasket and (4) 6-32 screws for mounting to our weatherproof 2-gang outlet box with 3/4" NPT access holes. Included in our Electric Brewery heating element assembly (DIY kit).
Standard straight cord/wire grip, 3/4" NPT
$24.95 USD
For cord diameter .63" to 0.75", aluminum, -30F to +225F. Included in our Electric Brewery heating element assembly (DIY kit).
Food grade silicone adhesive/sealant (2.8 oz)
$17.95 USD
Multipurpose silicone adhesive/sealant. 2.8 oz tube, translucent, FDA approved. Food grade: Meets MIL-A-46106B, Group I, Type I, FDA compliant, USDA approved, NSF 51 certified) Rated from -75F to +400F Included in our Electric Brewery heating element assemblies (both pre-assembled and DIY...
JB Weld cold weld compound (2oz)
$9.95 USD
Included in our Electric Brewery heating element assembly (DIY kit).
Stainless steel locknut, 1" NPS
$12.95 USD
Fits on heating element threads. Included in our Electric Brewery heating element assemblies (both pre-assembled and DIY kit).
Stainless steel washer/shim, 1-1/2" ID, 2-1/4" OD, 0.075" thick
$6.95 USD
Included in our Electric Brewery heating element assemblies (both pre-assembled and DIY kit).
Silicone high temperature o-ring (1-3/16" ID x 1-7/16" OD x 1/8" thick, AS568A Dash No. 217, Durometer hardness A70, FDA compliant, -65F to +450F)
$0.99 USD
Forms a watertight seal between the kettle wall and the heating element box when used in conjunction with a stainless steel washer/shim, 0.075" thick, 1-1/2" ID, 2-1/4" OD. Included in our Electric Brewery heating element assemblies (both pre-assembled and DIY kit).
Premium SJEOOW 10 gauge 3-conductor wire, oil/water resistant, rubber coating, rated for outdoor use (Sold by the foot)
$4.49 USD
Perfect for heating element cords or for 30A control panel power cords. SJEOOW wire features a thermoplastic elastomer jacket which means that the cable remains more flexible than a standard (less expensive) cord. Rated to 300 volts and from -50 to...
10 gauge ring terminal, #10 hole, yellow (25 pack)
$8.99 USD
Ring terminal, vinyl insulated, accepts 12-10 wire gauge, for #10 stud. Used on all 10 gauge screw connections. For connecting to ground stud within control panels use 10 gauge ring terminal, #14 hole instead. Included in our Electric Brewery Control Panel kits, Standard...
1/2" expandable braided sleeving, carbon/black (Sold by the foot)
$0.50 USD
Perfect for protecting 10 gauge SJEOOW wire used as heating element cord. It is recommended that you purchase 30% more than the cord length you wish to cover to account for shrinking during installation. Included in our Electric Brewery heating element...
3/4" black heat shrink tubing, 2:1 shrink ratio (Sold by the foot)
$0.75 USD
Included in our Electric Brewery heating element assembly (DIY kit). Price is per foot.
NEMA L6-30 (250VAC, 30A) twist lock electrical male plug
$26.95 USD
Used on heating element cables and plugs into a control panel. Industrial grade and twist locking for safety. 3 wire. Included in our Electric Brewery heating element assembly (DIY kit).
Double ratcheting wire crimper
$34.95 USD
Used to attach spade and ring terminals to wires. These crimp in two spots at once which saves time and creates a better connection as they apply force continuously and evenly. Crimps 22-18, 16-14, and 12-10 gauge sizes (insulated)
Self-adjusting wire stripper
Self-adjusting automatic wire stripper with cutter. Works with single conductor 10 to 24 gauge wires.
