Newest Items
NEMA L5-15 (125VAC, 15A) twist lock electrical female connector
$22.95 USD
Make an extension cord for 120V pumps that have a locking plug by using this connector with our NEMA L5-15 (125VAC, 15A) twist lock electrical male plug and premium SJEOOW 14 gauge 3-conductor wire. Add optional 1/4" expandable braided sleeving and 3/8" black heat...
NEMA L6-15 (250VAC, 15A) twist lock electrical female connector
$20.95 USD
Make an extension cord for 240V pumps that have a locking plug by using this connector with our NEMA L6-15 (250VAC, 15A) twist lock electrical male plug and premium SJEOOW 14 gauge 3-conductor wire. Add optional 1/4" expandable braided sleeving and 3/8" black...
Chugger Mini Max TEFC pump, stainless steel head, center inlet, 115/230V (TCPSS-CI)
Tough little continuous-duty pump that can be non-stop for extended periods. Handles liquids up to 250° F and has a TEFC (Totally Enclosed Fan Cooled) dual voltage motor (user selectable 115VAC and 230VAC). Consider this pump over the other models primarily...
Chugger pump, stainless steel head, center inlet, 230V (CPSS-CI-2)
Tough little continuous-duty pump that can be non-stop for extended periods. Handles liquids up to 250° F. International version for 220-240V countries (United Kingdom, Australia, New Zealand, many parts of Europe, etc.). Comes standard with a 4 foot 7 inch...
Silicone temperature probe cap (water-resistant/splash-proof)
$3.49 USD
Want to protect your temperature probe kettle connections when rinsing your kettles? Add a water-resistant/splash-proof silicone temperature probe cap to stop water from getting into the connector when your cable is disconnected. Works on all of our temperature probes. Simply...
NEMA L6-30 (250VAC, 30A) twist lock electrical female receptacle (DOES NOT FIT PRE-CUT ENCLOSURES)
$39.95 USD $49.95 USD
Used as heating element receptacles on control panels. Industrial grade and twist locking for safety. 3 wire. Made by Hubbell. Closeout only, until stock runs out. Hole Size: 2.04"Screw Holes: 3 x 0.185" @ 120 degrees on 2.5" Dia. Bolt...
Stainless steel elbow 1/2" NPT female x 1/2" NPT female
$2.99 USD
1/2" NPT female thread on both ends. 304 Stainless, class 150.
Stainless steel female quick disconnect x 1/2" barb
$15.95 USD
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. Mates with the male end to form a locking seal. The...
50A Electric Brewery Control Panel power cord (DIY Kit)
$149.95 USD
50A power cord for powering any of our 50A control panels. It plugs into a standard 4-slot North American stove wall receptacle (240V/50A NEMA 14-50R with ground). DIY Kit (4 wires must be attached between the cord and plug using a screwdriver). A locking female...
30A Electric Brewery Control Panel power cord (DIY Kit)
$84.95 USD
30A power cord for powering our 30A control panels. It plugs into a standard 4-slot North American dryer wall receptacle (240V/30A NEMA 14-30R with ground). DIY Kit (4 wires must be attached between the cord and plug using a screwdriver). A locking female connector is used...
Silicone high temperature o-ring (13/16" ID, 1-1/16" OD, 1/8" thick, AS568A Dash No. 211, Durometer hardness A70, FDA compliant, -65F to +450F)
$0.65 USD
Forms a watertight seal against the outside kettle wall when used in conjunction with a stainless steel 1/2" NPT lock nut and a Stainless steel washer/shim, 1-1/8" ID, 1-5/8" OD, 0.062" thick.
Stainless steel washer/shim, 1" ID, 1 1/2" OD 0.048" thick
$3.99 USD
Used to replace the linear flow valve on Blichmann G2 style pots for a regular ball valve. For more details see our Using BoilerMaker G2 kettles on our setup guide. Use in conjunction with Silicone O-Ring size 116. 18-8 Stainless.
Gift Card
$10.00 USD
Shopping for someone else but not sure what to give them? Give them the gift of choice with a TheElectricBrewery.com gift card to help them in their goal of building the perfect Electric Brewery! Gift cards are delivered by email...
Stainless steel ball valve 1/2" NPT full port
$13.95 USD
1/2" NPT female input and output. Can be disassembled using two wrenches for cleaning. Suitable for fluid temperatures between -20 to 450 degrees F, and pressures up to 1000 PSI. A full port (also known as full bore) ball valve has...
Stainless steel washer/shim, 1-1/8" ID, 1-5/8" OD, 0.062" thick
$6.95 USD
Forms a watertight seal against the outside kettle wall when used in conjunction with a stainless steel 1/2" NPT lock nut and a silicone high temperature o-ring, 13/16" ID x 1-1/16" OD x 1/8" width. 304 Stainless.
Stainless steel full coupler 1/2" NPT female
$3.95 USD
Used for connecting two 1/2" NPT male fittings together. Called a 'full' coupler because fittings can be attached from either side. 304 Stainless.
Stainless steel nipple threaded 1/2" x close NPT
$2.99 USD
Used for connecting two 1/2" NPT female fittings together. Called a 'close' nipple because there is no space between the two threaded sides. 304 Stainless.
Stainless steel 1/2" compression x 1/2" NPT male fitting
$16.95 USD
Used on the Hot Liquor Tank water return. May also be used to attach a HERMS coil to a kettle with female 1/2" NPT couplers. 304 Stainless.
Stainless steel 1/2" compression x 1/2" NPT female fitting
$22.95 USD
1/2" Compression x 1/2" NPT female fitting. Used to attach the HERMS coil to your kettle. 304 Stainless.
Stainless steel washer/shim, 7/8" ID, 1-3/8" OD, 0.062" thick
$4.95 USD
Used on the side of the kettle wall to provide a contact surface for other fittings. 18-8 Stainless.
Silicone high temperature o-ring (3/4" ID, 15/16" OD, 3/32" thick, AS568A Dash No. 116, Durometer hardness A70, FDA compliant, -65F to +450F)
$0.49 USD
Used to replace the linear flow valve on Blichmann G2 style pots for a regular ball valve. For more details see our Using BoilerMaker G2 kettles on our setup guide. Use in conjunction with Stainless steel washer/shim, 1" ID, 1 1/2" OD...
Stainless steel street elbow 1/2" NPT female x 1/2" NPT male
$3.95 USD
1/2" NPT female thread on one end, 1/2" NPT male on the other. Want to waste half an hour? Try and figure out why these are called 'street' fittings. 304 Stainless, class 150.
Stainless steel coupler 3/4" NPT female x 1/2" NPT female
$3.95 USD
Use on pumps with 3/4" NPT inlets to reduce the size to 1/2" NPT. Larger input pumps are easier to prime. 304 Stainless.
Stainless steel 1/2" NPT female x 1/2" barb fitting
$4.95 USD
Use these together with our Stainless steel female quick disconnect x 1/2" NPT male fitting to finish the ends of your hoses. We opted to use two pieces as adding the barbed fitting makes the solid ends of the hose a bit...
Stainless steel 1/2" NPT lock nut
$3.95 USD
These lock nuts have a recessed grove on the inside into which the o-ring fits partially to avoid being overly compressed when the lock nut is tightened. 304 Stainless.
Stainless steel tee, 1/2" NPT female
$3.95 USD
Perfect for adding a 1/2" NPT Electric Brewery temperature probe in-line with the flow. 1/2" Female National Pipe Thread on all three openings. 2" length x 1.5" width. 304 Stainless, class 150.
Stainless steel smooth-band worm-drive hose clamp, 5/8" to 1-1/16" clamp diameter range
$2.49 USD
These special smooth-band hose clamps have a smooth band with rolled edges ideal for use with silicone tubing. We do not recommend using regular hose clamps for silicone hoses as the band can cut into the hose when tightening and...
Electric Brewery temperature probe cable only (DIY Kit)
$29.00 USD
These cables include a 3-pin disconnect at the probe end and a female XLR connector at the control panel end. Includes two layers of sleeving, a stainless steel wire rope, and high quality 3:1 ratio heat shrink tubing for ultimate protection. Detachable for easy...
High temperature food-grade silicone tubing, 1/2" ID, 3/4" OD (Sold by the foot)
$3.49 USD
The silicone tubing we use is odourless, tasteless, inert, and FDA food-grade approved from -100F all the way up to 500F. The tubing is also translucent which lets us see the flow of liquid and air bubbles. If you're looking...
63A/250V DPST contactor, 220-240V AC coil, DIN rail mount
$34.95 USD
Two pole definite purpose contactor, DIN rail mountable. 220-240 VAC coil voltageDPSTNormally open63A max contact rating (resistive load) Can be used to switch lower current ratings as well (such as 50A and 30A).
32A/250V DPST contactor, 220-240V AC coil, DIN rail mount
$34.95 USD
Two pole definite purpose contactor, DIN rail mountable. 220-240 VAC coil voltageDPSTNormally open32A max contact rating (resistive load) Can be used to switch lower current ratings as well (such as 15-30A).
32A/250V DPST contactor, 110-120V AC coil, DIN rail mount
$34.95 USD
Two pole definite purpose contactor, DIN rail mountable. 110-120 VAC coil voltageDPSTNormally open32A max contact rating (resistive load) Can be used to switch lower current ratings as well (such as 15-30A).
Stainless steel female quick disconnect x 1/2" NPT male
$15.95 USD
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. Mates with the male end to form a locking seal. The...
Stainless steel male quick disconnect x 1/2" NPT male
$10.95 USD
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. The male end is simply a post with a locking groove...
Silicone adhesive/sealant (1 oz)
$2.99 USD
1oz tube of RTV Silicone Sealant. Used to provide watertight seal of the panel meters and heat sink to the control panel enclosure. This silicone sealant is NOT food safe! Included in our Electric Brewery Control Panel kits.
Temperature probe wire, bare, 3-conductor, Teflon™ coated (Sold by the foot)
$1.49 USD
3-conductor 24 gauge copper wire coated with Teflon™ can be used for RTD probe extensions or making your own cables. Rated to 400F. Price is per foot.
Temperature probe wire with locking connector, 3-conductor, Teflon™ coated
$12.95 USD
Bare 3-conductor temperature probe wire with 3-pin locking connector. Offered in 3 lengths (6', 8', and 12'). Teflon™ coated wire is rated to 400F. Already included in our temperature probe kits. Contact us for custom lengths. Does this cable work...
NEMA L6-30 (250VAC, 30A) twist lock electrical male receptacle
$59.95 USD
Can be used as a power cord receptacle on a 30A control panel meant for international use (240V only). Industrial grade and twist locking for safety. 3 wire.
NEMA L6-30 (250VAC, 30A) twist lock electrical female receptacle
$84.95 USD
Used as heating element receptacles on control panels. Industrial grade and twist locking for safety. 3 wire. Grey. Hole diameter: 2.26". Used in our control panels prior to summer/fall of 2023. If you require a replacement, best to measure to...
NEMA L6-15 (250VAC, 15A) twist lock electrical female receptacle
$44.95 USD
Used as the 240V pump receptacle for international control panels. Industrial grade and twist locking for safety. 3 wire. White. Included in our Electric Brewery Control Panel kits meant for international use.
Standard 30A Electric Brewery Control Panel Wiring Kit
$99.95 USD
This kit is intended for someone who wants to source all of the major control panel parts themselves but is having difficulty finding these smaller parts. It includes everything you need to wire up your Standard 30A Electric Brewery Control...
Self-adjusting wire stripper
Self-adjusting automatic wire stripper with cutter. Works with single conductor 10 to 24 gauge wires.
XLR cable female connector, 3 pin
$5.95 USD
Used on temperature probe cables and plugs into the control panel. Locking for safety. 3 wire. Included in our Electric Brewery temperature probe kits.
Stainless steel wire rope, 1x7 strand, 1/32" diameter, 150 pound break strength (Sold by the foot)
$0.75 USD
Adds protection to smaller diameter wiring. Included in our Electric Brewery temperature probe kits. Price is per foot.
1/4" black heat shrink tubing, 2:1 shrink ratio (Sold by the foot)
$0.50 USD
Included in our Electric Brewery temperature probe kits. Price is per foot.
3/4" black heat shrink tubing, 3:1 shrink ratio (Sold by the foot)
$1.50 USD
Replaces the 5/8" black heat shrink tubing in our temperature probe build instructions. 3:1 heatshrink tubing works better than 2:1 as it can fit over the factory end of the probe. Typical starting diameter is 18mm, or about 3/4". Included in our Electric Brewery...
1/8" expandable braided sleeving (Sold by the foot)
$0.30 USD
Perfect for protecting 24 gauge temperature probe wire and other smaller wiring. It is recommended that you purchase 20% more than the cord length you wish to cover to account for shrinking during installation. Included in our Electric Brewery temperature probe kits....
3/8" black heat shrink tubing, 2:1 shrink ratio (Sold by the foot)
$0.50 USD
Used in our pre-assembled temperature probes as a final 2" piece outside the other two pieces of heat shrink tubing, for a night tight finish. Included in our Electric Brewery temperature probe kits. Price is per foot.
1/4" expandable braided sleeving, carbon/black (Sold by the foot)
$0.40 USD
Perfect for protecting 14 gauge SJEOOW wire such as pump cords. It is recommended that you purchase 20% more than the cord length you wish to cover to account for shrinking during installation. Price is per foot.
Stainless steel locknut, 1" NPS
$12.95 USD
Fits on heating element threads. Included in our Electric Brewery heating element assemblies (both pre-assembled and DIY kit).
