Products
Stainless steel female quick disconnect x 1/2" NPT male
$15.95 USD
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. Mates with the male end to form a locking seal. The...
Stainless steel full coupler 1/2" NPT female
$3.95 USD
Used for connecting two 1/2" NPT male fittings together. Called a 'full' coupler because fittings can be attached from either side. 304 Stainless.
Stainless steel locknut, 1" NPS
$12.95 USD
Fits on heating element threads. Included in our Electric Brewery heating element assemblies (both pre-assembled and DIY kit).
Stainless steel male quick disconnect x 1.5" Tri-Clamp
$12.95 USD
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. The male end is simply a post with a...
Stainless steel male quick disconnect x 1/2" NPT male
$10.95 USD
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. The male end is simply a post with a locking groove...
Stainless steel nipple threaded 1/2" x close NPT
$2.99 USD
Used for connecting two 1/2" NPT female fittings together. Called a 'close' nipple because there is no space between the two threaded sides. 304 Stainless.
Stainless steel smooth-band worm-drive hose clamp, 5/8" to 1-1/16" clamp diameter range
$2.49 USD
These special smooth-band hose clamps have a smooth band with rolled edges ideal for use with silicone tubing. We do not recommend using regular hose clamps for silicone hoses as the band can cut into the hose when tightening and...
Stainless steel street elbow 1/2" NPT female x 1/2" NPT male
$3.95 USD
1/2" NPT female thread on one end, 1/2" NPT male on the other. Want to waste half an hour? Try and figure out why these are called 'street' fittings. 304 Stainless, class 150.
Stainless steel tee, 1/2" NPT female
$3.95 USD
Perfect for adding a 1/2" NPT Electric Brewery temperature probe in-line with the flow. 1/2" Female National Pipe Thread on all three openings. 2" length x 1.5" width. 304 Stainless, class 150.
Stainless steel washer/shim, 1" ID, 1 1/2" OD 0.048" thick
$3.99 USD
Used to replace the linear flow valve on Blichmann G2 style pots for a regular ball valve. For more details see our Using BoilerMaker G2 kettles on our setup guide. Use in conjunction with Silicone O-Ring size 116. 18-8 Stainless.
Stainless steel washer/shim, 1-1/2" ID, 2-1/4" OD, 0.075" thick
$6.95 USD
Included in our Electric Brewery heating element assemblies (both pre-assembled and DIY kit).
Stainless steel washer/shim, 1-1/8" ID, 1-5/8" OD, 0.062" thick
$6.95 USD
Forms a watertight seal against the outside kettle wall when used in conjunction with a stainless steel 1/2" NPT lock nut and a silicone high temperature o-ring, 13/16" ID x 1-1/16" OD x 1/8" width. 304 Stainless.
Stainless steel washer/shim, 7/8" ID, 1-3/8" OD, 0.062" thick
$4.95 USD
Used on the side of the kettle wall to provide a contact surface for other fittings. 18-8 Stainless.
Stainless steel wire rope, 1x7 strand, 1/32" diameter, 150 pound break strength (Sold by the foot)
$0.75 USD
Adds protection to smaller diameter wiring. Included in our Electric Brewery temperature probe kits. Price is per foot.
Standard 30A Electric Brewery Control Panel (DIY Kit)
$1,695.00 USD
Our most popular control panel! Perfect for producing up to 20 gallons of finished product per batch. DIY kit. You supply the tools. A single element is used in both the boil kettle and hot liquor tank. The control panel...
Standard 30A Electric Brewery Control Panel (DIY Kit, 240V only, for international use)
$1,695.00 USD
Our standard control panel for producing up to 20 gallons of finished product per batch. DIY kit. You supply the tools. International version for 220-240V countries (United Kingdom, Australia, New Zealand, many parts of Europe, etc.). For more information see...
Standard 30A Electric Brewery Control Panel (Pre-Assembled)
$2,095.00 USD
Our most popular control panel! Perfect for producing up to 20 gallons of finished product per batch. Pre-assembled and ready to use. A single element is used in both the boil kettle and hot liquor tank. The control panel is...
Standard 30A Electric Brewery Control Panel Wiring Kit
$99.95 USD
This kit is intended for someone who wants to source all of the major control panel parts themselves but is having difficulty finding these smaller parts. It includes everything you need to wire up your Standard 30A Electric Brewery Control...
Standard straight cord/wire grip, 3/4" NPT
$24.95 USD
For cord diameter .63" to 0.75", aluminum, -30F to +225F. Included in our Electric Brewery heating element assembly (DIY kit).
SYL-2352 PID temperature controller
$56.95 USD
1/16 DIN (45x45 mm) PID temperature controller with fuzzy logic enhancement and SSR control output. 0.2% accuracy over the entire input range Selectable Fahrenheit or Celsius temperature Supports both heating and cooling mode Auto/manual control with bump less transfer Dual...
Temperature probe tip, 1.5" Tri-Clamp, 1.38"/35mm probe length
$39.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). The 1.38" (35mm) long probe can be attached directly into an instrument (not standard or...
Temperature probe tip, 1.5" Tri-Clamp, 2.36"/60mm probe length
$39.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). The 2.36" (60mm) long probe can be attached directly into a standard or full (not instrument)...
Temperature probe tip, 1.5" Tri-Clamp, 6"/150mm probe length
$42.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our...
Temperature probe tip, 1.5" Tri-Clamp, 8"/200mm probe length
$44.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our...
Temperature probe tip, 1/2" NPT for thermowell
$29.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). Tip/wire length is 6.7" long, intended for use in a...
Temperature probe tip, 1/2" NPT, 1.5" probe length
$28.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). The 1.5" long probe (measured from the back part of the threads...
Temperature probe tip, 1/2" NPT, 2.5" probe length
$30.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). 2.5" long probe (measured from the back part of the threads to...
Temperature probe tip, 1/2" NPT, 4" probe length
$33.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). 4" long probe (measured from the back part of the threads...
Temperature probe tip, 1/2" NPT, 6" probe length
$33.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). 6" long probe (measured from the back part of the threads...
Temperature probe tip, 1/4" NPT, 2" probe length
$29.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/4" NPT thread (as well as 1/4" BSPP and BSPT). 2" long probe (measured from the back part of the threads to the...
Temperature probe tip, 1/4" NPT, 4" probe length
$32.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/4" NPT thread (as well as 1/4" BSPP and BSPT). 4" long probe (measured from the back part of the threads to the...
Temperature probe tip, 2" Tri-Clamp, 6"/150mm probe length
$43.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our...
Temperature probe tip, 2" Tri-Clamp, 8"/200mm probe length
$45.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our...
Temperature probe tip, M14x1.5 Metric, 2" probe length
$31.95 USD
Stainless steel probe body. Metric (straight) thread probes are normally used directly in a kettle wall such as the Boil Kettle, resulting in a weldless installation. Simply punch a hole in your kettle wall and attach using the included stainless steel nut...
Temperature probe wire with locking connector, 3-conductor, Teflon™ coated
$12.95 USD
Bare 3-conductor temperature probe wire with 3-pin locking connector. Offered in 3 lengths (6', 8', and 12'). Teflon™ coated wire is rated to 400F. Already included in our temperature probe kits. Contact us for custom lengths. Does this cable work...
Temperature probe wire, bare, 3-conductor, Teflon™ coated (Sold by the foot)
$1.49 USD
3-conductor 24 gauge copper wire coated with Teflon™ can be used for RTD probe extensions or making your own cables. Rated to 400F. Price is per foot.
Terminal strip jumper, 8 position
$3.95 USD
8-position terminal strip jumper. Connects all 8 positions of the panel mount terminal strip to reduce wiring. (Terminal strip not included). Included in our Electric Brewery Control Panel kits.
Terminal strip, 8 position
$6.95 USD
8 Position dual row terminal strip, 20A/300V. Want to save some wiring work? Use a terminal strip jumper. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit.
The Complete Guide to Building Your Brewery
An electronic book version of the main build instructions on our website perfect for reading offline, printing, or just having a backup. Available for immediate download - no waiting! Over 380 pages of detailed step by step instructions with hundreds...
Weatherproof 2-gang blank cover with gasket
$4.95 USD
2-gang blank cover for electrical boxes. Comes with gasket and (4) 6-32 screws for mounting to our weatherproof 2-gang outlet box with 3/4" NPT access holes. Included in our Electric Brewery heating element assembly (DIY kit).
Weatherproof 2-gang outlet box with 3/4" NPT access holes
$23.95 USD
Dual gang electrical box with (3) 3/4 NPT holes for use in building heating element boxes. Includes (2) plastic caps for covering empty 3/4" NPT holes. Covers sold separately. Included in our Electric Brewery heating element assembly (DIY kit).
White 10 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
$0.75 USD
Included in our Electric Brewery Control Panel kits (240V only, for international use). Price is per foot.
White 14 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
$0.35 USD
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
XLR cable female connector, 3 pin
$5.95 USD
Used on temperature probe cables and plugs into the control panel. Locking for safety. 3 wire. Included in our Electric Brewery temperature probe kits.
XLR chassis mount male receptacle, 3 pin
$5.95 USD
Used as temperature probe receptacles on control panels. Locking for safety. 3 wire. Included in our Electric Brewery Control Panel kits.
Yellow 22mm LED pilot light, 100-120V AC/DC
$4.95 USD
Installs in a 22mm diameter hole. Powered by 100-120V AC or DC. Includes rubber gasket and lock nut. LED lights are brighter and more evenly lit than the incandescent versions and will last considerably longer, not to mention use less...
Yellow 22mm LED pilot light, 220-240V AC/DC
$4.95 USD
Installs in a 22mm diameter hole. Powered by 220-240V AC or DC. Includes rubber gasket and lock nut. LED lights are brighter and more evenly lit than the incandescent versions and will last considerably longer, not to mention use less...
