Stainless steel male quick disconnect x 1.5" Tri-Clamp
QDTCM
$12.95 USD
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. The male end is simply a post with a locking groove in it. Mates with the female end to form a locking seal.
The Tri-Clamp (sometimes called Tri-Clover) side is normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included).
304 Stainless.
Note: For quick disconnects always purchase the male and female ends from the same manufacturer to ensure proper fit. Improper fit can lead to leaks (fit too loose) or damaged o-rings / o-rings that get dislodged (fit too tight).
Note that with Tri-Clamp fittings the size refers to the outside diameter of the tubing that it makes a connection for, not the flange diameter (the flat disc part).
For 1.5" Tri-Clamp fittings the diameter of the outer flange is 1.988" (50.5mm). The 1.5" Tri-Clamp flange works directly with 1" (25mm), 1.33" (33.7mm), or 1.5" (38mm) Tri-Clamp fittings. 1.5" Tri-Clamp probes can be used in 2" Tri-Clamp fittings (or vice versa) with a suitable adapter/reducer (not included).
Related Items
Electric Brewery HERMS Coil, standard size, 15.5" diameter, 7" high
$289.95 USD
Professionally manufactured by a US stainless tubing company using US sourced stainless steel, ready for use in your electric brewery setup. The longer 50 foot length ensures that heat transfer is maximized and the large 1/2 inch tubing minimizes flow...
Electric Brewery HERMS Coil, small size, 11.25" diameter, 9.5" high
$289.95 USD
Professionally manufactured by a US stainless tubing company using US sourced stainless steel, ready for use in your electric brewery setup. The longer 50 foot length ensures that heat transfer is maximized and the large 1/2 inch tubing minimizes flow...
Stainless steel ball valve 1/2" NPT full port
$13.95 USD
1/2" NPT female input and output. Can be disassembled using two wrenches for cleaning. Suitable for fluid temperatures between -20 to 450 degrees F, and pressures up to 1000 PSI. A full port (also known as full bore) ball valve has...
Stainless steel bi-metal thermometer, 1/2" NPT male, 2.5" probe
$19.95 USD
We use this thermometer on the output side of the counterflow chiller so that we can monitor the temperature of the cooled wort. For more information see our Wort Chiller guide. Can also be used on any kettle that has a 1/2"...
