Temperature probe tip, 1.5" Tri-Clamp, 1.38"/35mm probe length
PROBETC1.5-35MM
$39.95 USD
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). The 1.38" (35mm) long probe can be attached directly into an instrument (not standard or full) Tri-Clamp tee without hitting the back wall of the tee. Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap.
Our temperature probes use 3-wire RTD (resistive thermal device) Pt100 sensors instead of 2-wire K-type thermocouples (TC) as they offer greater accuracy over the brewing temperature range. RTDs also remain more accurate over time (less drift which means less re-calibration). To use, connect to a device that supports 3-wire RTD temperature probes such as our Electric Brewery Control Panels. Cable sold separately.
Note that with Tri-Clamp fittings the size refers to the outside diameter of the tubing that it makes a connection for, not the flange diameter (the flat disc part).
For 1.5" Tri-Clamp fittings the diameter of the outer flange is 1.988" (50.5mm). The 1.5" Tri-Clamp flange works directly with 1" (25mm), 1.33" (33.7mm), or 1.5" (38mm) Tri-Clamp fittings. 1.5" Tri-Clamp probes can be used in 2" Tri-Clamp fittings (or vice versa) with a suitable adapter/reducer (not included).
Are temperature probe tips interchangeable?
Yes. Any of our temperature probe tips can be used with any of our temperature probe cables.
Specifications
Sensor: RTD (resistive thermal device) Pt100
Max sensor temperature: 248 °F (120 °C)
Accuracy: Class A (+/- 0.15°C at 0°C) per International Electrotechnical Commission (IEC) 60751
Alpha coefficient: 0.003850
Related Items
Electric Brewery temperature probe, M14x1.5 Metric, 2" probe length (Pre-Assembled)
$79.95 USD
Metric (straight) thread probes are normally used directly in a kettle wall such as the Boil Kettle, resulting in a weldless installation. Simply punch a hole in your kettle wall and attach using the included stainless steel nut and silicone washer. 2" long probe...
Electric Brewery temperature probe, 1/2" NPT, 1.5" probe length (Pre-Assembled)
$76.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). The 1.5" long probe (measured from the back part of the threads to the probe tip) can be screwed...
Electric Brewery temperature probe,1/4" NPT, 2" probe length (Pre-Assembled)
$77.95 USD
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Mounts into 1/4" NPT thread (as well as 1/4" BSPP and BSPT). Simply wrap the threads with telfon tape and screw in to fasten. Includes two layers of sleeving,...
Electric Brewery temperature probe, 1.5" Tri-Clamp (Pre-Assembled)
$87.95 USD
Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Includes two layers of sleeving, a stainless steel wire rope with 150lb break strength, and high quality 3:1 ratio heat shrink...
