Search
- 148 results
22 gauge 2-conductor wire (Sold by the foot)
Perfect for wiring up the meters, power supplies, SSRs, and other locations where two small gauge conductors are required. Price is per foot.
NEMA L14-30 (125/250VAC, 30A) twist lock electrical male receptacle
Used as a power cord receptacle on a 30A control panel. Industrial grade and twist locking for safety. 4 wire. White. Included in our Standard 30A Electric Brewery Control Panel (DIY Kit).
Red 10 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
Temperature probe wire, bare, 3-conductor, Teflon™ coated (Sold by the foot)
3-conductor 24 gauge copper wire coated with Teflon™ can be used for RTD probe extensions or making your own cables. Rated to 400F. Price is per foot.
Temperature probe wire with locking connector, 3-conductor, Teflon™ coated
Bare 3-conductor temperature probe wire with 3-pin locking connector. Offered in 3 lengths (6', 8', and 12'). Teflon™ coated wire is rated to 400F. Already included in our temperature probe kits. Contact us for custom lengths. Does this cable work...
10A 8-pin 2-pole ice cube plug-in relay with socket, 110-120V AC coil
Used to implement the safe start feature found in our Electric Brewery Control Panels. Includes socket. DIN rail mountable. Included in our Electric Brewery Control Panel kits.
White 14 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
NEMA L6-30 (250VAC, 30A) twist lock electrical female receptacle
Used as heating element receptacles on control panels. Industrial grade and twist locking for safety. 3 wire. White. Hole diameter: 2.125". Used in our control panels since summer/fall of 2023. If you require a replacement, best to measure to confirm....
22 gauge 4-conductor wire (Sold by the foot)
Perfect for wiring up the XLR receptacles and other locations where more than two small gauge conductors are required. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
NEMA L6-30 (250VAC, 30A) twist lock electrical female connector
Used on a power cord for a Standard 30A Electric Brewery Control Panel (DIY Kit, 240V only, for international use). This is the connector that plugs into the control panel. Industrial grade and twist locking for safety. 3 wire.
Standard straight cord/wire grip, 3/4" NPT
For cord diameter .63" to 0.75", aluminum, -30F to +225F. Included in our Electric Brewery heating element assembly (DIY kit).
50A/250V DPST contactor, 110-120V AC coil
Two pole definite purpose contactor. 110-120 VAC coil voltageDPSTNormally open50A max contact rating (resistive load) Can be used to switch lower current ratings as well (such as 30A). Included in our Electric Brewery Control Panel kits.
Electric Brewery temperature probe, 1/2" NPT, 1.5" probe length (Pre-Assembled)
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). The 1.5" long probe (measured from the back part of the threads to the probe tip) can be screwed...
Electric Brewery temperature probe,1/4" NPT, 2" probe length (Pre-Assembled)
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Mounts into 1/4" NPT thread (as well as 1/4" BSPP and BSPT). Simply wrap the threads with telfon tape and screw in to fasten. Includes two layers of sleeving,...
Black 14 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
JSL-74A timer
Compact multifunction timer with multiple operating modes, perfect for brewing. Remembers time between power cycles (handy if you live in an area with frequent power interruptions or happen to turn the control panel off momentarily during use). Identical features to...
63A/250V DPST contactor, 220-240V AC coil, DIN rail mount
Two pole definite purpose contactor, DIN rail mountable. 220-240 VAC coil voltageDPSTNormally open63A max contact rating (resistive load) Can be used to switch lower current ratings as well (such as 50A and 30A).
1/2" spiral wire wrap (Sold by the foot)
1/2 inch polyethylene expandable spiral cut wrap used to protect wire, hose or cable bundles from 3/8 inch to 4 inch diameter. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is...
Stainless steel wire rope, 1x7 strand, 1/32" diameter, 150 pound break strength (Sold by the foot)
Adds protection to smaller diameter wiring. Included in our Electric Brewery temperature probe kits. Price is per foot.
NEMA L5-15 (125VAC, 15A) twist lock electrical female receptacle
Used as a 120V pump receptacle on a control panel. Industrial grade and twist locking for safety. 3 wire. Grey.
63A/250V DPST contactor, 110-120V AC coil, DIN rail mount
Two pole definite purpose contactor, DIN rail mountable. 110-120 VAC coil voltageDPSTNormally open63A max contact rating (resistive load) Can be used to switch lower current ratings as well (such as 50A and 30A). Used in our pre-assembled 50A control panels.
Temperature probe tip, 1/2" NPT, 1.5" probe length
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). The 1.5" long probe (measured from the back part of the threads...
30A/250V fast acting fuse, fiber body, BLN 10x38mm
BLN (10x38mm) midget style fuse. Fuse holder sold separately. Included in our 50A Electric Brewery Control Panel kits.
Electric Brewery temperature probe, 2" Tri-Clamp (Pre-Assembled)
Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Includes two layers of sleeving, a stainless steel wire rope with 150lb break strength, and high quality 3:1 ratio heat shrink...
NEMA L5-15 (125VAC, 15A) twist lock electrical female receptacle
Used as a 120V pump receptacle on a control panel. Industrial grade and twist locking for safety. 3 wire. White. Included in our Electric Brewery Control Panel kits.
Electric Brewery temperature probe cable only (DIY Kit)
These cables include a 3-pin disconnect at the probe end and a female XLR connector at the control panel end. Includes two layers of sleeving, a stainless steel wire rope, and high quality 3:1 ratio heat shrink tubing for ultimate protection. Detachable for easy...
32A/250V DPST contactor, 220-240V AC coil, DIN rail mount
Two pole definite purpose contactor, DIN rail mountable. 220-240 VAC coil voltageDPSTNormally open32A max contact rating (resistive load) Can be used to switch lower current ratings as well (such as 15-30A).
Locking grounded California-style male receptacle (125/250VAC, 50A)
Used as a power cord receptacle on a 50A control panel. Industrial grade and twist locking for safety. 4 wire. UL Listed: E57672CSA Certified: LR81290 Included in our 50A Electric Brewery Control Panel kits.
30A/240V DPST relay, 220-240V AC coil
Open style panel mount power relay. 220-240 VAC coil voltageDPSTNormally open40A contact rating (resistive) Can be used to switch lower current ratings as well (such as 30A). Included in our Electric Brewery Control Panel kits meant for international use.
Electric Brewery temperature probe, 1/2" NPT, 1.5" probe length (DIY Kit)
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). The 1.5" long probe (measured from the back part of the threads to the probe tip) can be screwed...
SYL-2352 PID temperature controller
1/16 DIN (45x45 mm) PID temperature controller with fuzzy logic enhancement and SSR control output. 0.2% accuracy over the entire input range Selectable Fahrenheit or Celsius temperature Supports both heating and cooling mode Auto/manual control with bump less transfer Dual...
3 digit blue LED digital panel amp meter with shunt, 50A AC, 5V DC supply
This is the same amp meter we use in our control panels. 3 digit blue LED panel mount with shunt Measures up to 50A AC Requires a dedicated 5V DC power supply 71x39mm cutout Included in our Electric Brewery Control Panel kits. For installation and...
Blue 22mm LED pilot light, 100-120V AC/DC
Installs in a 22mm diameter hole. Powered by 100-120V AC or DC. Includes rubber gasket and lock nut. LED lights are brighter and more evenly lit than the incandescent versions and will last considerably longer, not to mention use less...
Electric Brewery temperature probe, M14x1.5 Metric, 2" probe length (Pre-Assembled)
Metric (straight) thread probes are normally used directly in a kettle wall such as the Boil Kettle, resulting in a weldless installation. Simply punch a hole in your kettle wall and attach using the included stainless steel nut and silicone washer. 2" long probe...
10A 8-pin 2-pole ice cube plug-in relay with socket, 220-240V AC coil
Used to implement the safe start feature found in our Electric Brewery Control Panels. Includes socket. DIN rail mountable. International version for 220-240V countries (United Kingdom, Australia, New Zealand, many parts of Europe, etc.). Included in our Electric Brewery Control Panel...
3/4" black heat shrink tubing, 2:1 shrink ratio (Sold by the foot)
Included in our Electric Brewery heating element assembly (DIY kit). Price is per foot.
Red 22mm LED pilot light, 100-120V AC/DC
Installs in a 22mm diameter hole. Powered by 100-120V AC or DC. Includes rubber gasket and lock nut. LED lights are brighter and more evenly lit than the incandescent versions and will last considerably longer, not to mention use less...
Electric Brewery temperature probe, 1/4" NPT, 2" probe length (DIY Kit)
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Mounts into 1/4" NPT thread (as well as 1/4" BSPP and BSPT). Simply wrap the threads with telfon tape and screw in to fasten. Includes two layers of sleeving,...
3 digit blue LED digital panel volt meter, 700V AC, 5V DC supply
This is the same volt meter we use in our control panels. 3 digit blue LED panel mount Measures up to 700V AC Requires a dedicated 5V DC power supply 71x39mm cutout Included in our Electric Brewery Control Panel kits. For installation and wiring instructions,...
Electric Brewery temperature probe, 1.5" Tri-Clamp (DIY Kit)
Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Includes two layers of sleeving, a stainless steel wire rope with 150lb break strength, and high quality 3:1 ratio heat shrink...
Electric Brewery temperature probe, 2" Tri-Clamp (DIY Kit)
Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Includes two layers of sleeving, a stainless steel wire rope with 150lb break strength, and high quality 3:1 ratio heat shrink...
Temperature probe tip, 1.5" Tri-Clamp, 8"/200mm probe length
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our...
Buzzer, 22mm, 100-120V AC/DC
Installs in a 22mm diameter hole. Powered by 100-120V AC or DC. Includes rubber gasket and lock nut. Include a red LED light, making the separate red pilot light on the control panel somewhat redundant. We continue to use both...
Electric Brewery temperature probe, M14x1.5 Metric, 2" probe length (DIY Kit)
Metric (straight) thread probes are normally used directly in a kettle wall such as the Boil Kettle, resulting in a weldless installation. Simply punch a hole in your kettle wall and attach using the included stainless steel nut and silicone washer. 2" long probe...
Locking grounded California-style female connector (125/250VAC, 50A)
Used in our 50A Electric Brewery Control Panel power cord. This is the connector that plugs into a 50A control panel. Industrial grade and twist locking for safety. 4 wire. UL Listed: E57672CSA Certified: LR81290
2 position maintained selector switch with key, NO/NC contactors
Switch quality varies greatly from one manufacturer to another. After more than 10 years and multiple manufacturers, we've settled on robust industrial switches with excellent quality parts that are made to last. You can feel the quality difference in use:...
Standard 30A Electric Brewery Control Panel (Pre-Assembled)
Our most popular control panel! Perfect for producing up to 20 gallons of finished product per batch. Pre-assembled and ready to use. A single element is used in both the boil kettle and hot liquor tank. The control panel is...
1/4" black heat shrink tubing, 2:1 shrink ratio (Sold by the foot)
Included in our Electric Brewery temperature probe kits. Price is per foot.
