Search
- 148 results
Standard 30A Electric Brewery Control Panel Wiring Kit
This kit is intended for someone who wants to source all of the major control panel parts themselves but is having difficulty finding these smaller parts. It includes everything you need to wire up your Standard 30A Electric Brewery Control...
Temperature probe tip, 1.5" Tri-Clamp, 6"/150mm probe length
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our...
Electric Brewery HERMS Coil, standard size, 15.5" diameter, 7" high
Professionally manufactured by a US stainless tubing company using US sourced stainless steel, ready for use in your electric brewery setup. The longer 50 foot length ensures that heat transfer is maximized and the large 1/2 inch tubing minimizes flow...
3/8" black heat shrink tubing, 2:1 shrink ratio (Sold by the foot)
Used in our pre-assembled temperature probes as a final 2" piece outside the other two pieces of heat shrink tubing, for a night tight finish. Included in our Electric Brewery temperature probe kits. Price is per foot.
Adjustable DC power supply, 4-30V AC/DC input, 1.5-27V DC output
Used for powering the amp and volt meters. Input: 4-30V AC/DCOutput: 1.5-27V DC (adjustable) With each power supply we also include: (4) 1/4" Nylon Standoffs, 4-40 Thread(4) 4-40 Nylon Screws(4) 4-40 Nylon Nuts (for those who do not wish to thread and...
Standard 30A Electric Brewery Control Panel (DIY Kit, 240V only, for international use)
Our standard control panel for producing up to 20 gallons of finished product per batch. DIY kit. You supply the tools. International version for 220-240V countries (United Kingdom, Australia, New Zealand, many parts of Europe, etc.). For more information see...
Yellow 22mm LED pilot light, 220-240V AC/DC
Installs in a 22mm diameter hole. Powered by 220-240V AC or DC. Includes rubber gasket and lock nut. LED lights are brighter and more evenly lit than the incandescent versions and will last considerably longer, not to mention use less...
Normally Open (NO) contactor, 10A/240VAC
Contactor (also known as a contact block) quality varies greatly from one manufacturer to another. After more than 10 years and multiple manufacturers, we've settled on robust industrial contactors that are made to last. You can feel the quality difference...
Momentary Pushbutton, NO/NC contactors
Switch quality varies greatly from one manufacturer to another. After more than 10 years and multiple manufacturers, we've settled on robust industrial switches with excellent quality parts that are made to last. You can feel the quality difference in use:...
50A Electric Brewery Control Panel for 30+ gallons (Pre-Assembled)
Our control panel for producing more than 30 gallons of finished product per batch or to speed up your brew day by reducing heat times. Pre-assembled and ready to use. Perfect for 1-3 bbl pilot systems. Up to two elements...
3 position maintained selector switch, 2 NO contactors
Switch quality varies greatly from one manufacturer to another. After more than 10 years and multiple manufacturers, we've settled on robust industrial switches with excellent quality parts that are made to last. You can feel the quality difference in use:...
2 position maintained selector switch, NO/NC contactors
Switch quality varies greatly from one manufacturer to another. After more than 10 years and multiple manufacturers, we've settled on these robust industrial switches with excellent quality parts that are made to last. You can feel the quality difference in...
Temperature probe tip, 1/4" NPT, 2" probe length
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/4" NPT thread (as well as 1/4" BSPP and BSPT). 2" long probe (measured from the back part of the threads to the...
Green 22mm LED pilot light, 220-240V AC/DC
Installs in a 22mm diameter hole. Powered by 220-240V AC or DC. Includes rubber gasket and lock nut. LED lights are brighter and more evenly lit than the incandescent versions and will last considerably longer, not to mention use less...
30A terminal block jumper
Jumper for all 30A DIN rail mountable terminal block buses (sold separately), including: 30A terminal block 30A terminal block, 2 level 30A terminal block, 2 level, feed through Amperage Rating: 30AVoltage Rating: 600VApprovals: UL (Recognized) Used in our pre-assembled 50A control...
3/4" black heat shrink tubing, 3:1 shrink ratio (Sold by the foot)
Replaces the 5/8" black heat shrink tubing in our temperature probe build instructions. 3:1 heatshrink tubing works better than 2:1 as it can fit over the factory end of the probe. Typical starting diameter is 18mm, or about 3/4". Included in our Electric Brewery...
50A Electric Brewery Control Panel for back to back batches (DIY Kit)
Our control panel for producing up to 20 gallons of finished product per batch, back to back. DIY kit. You supply the tools. A single element is used in the boil kettle and hot liquor tank, but both may be...
Temperature probe tip, 2" Tri-Clamp, 8"/200mm probe length
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our...
Adjustable DC power supply, 85-264V AC input, 4.75-5.5V DC output, DIN rail mount
DIN rail mount 85-264VAC to 5VDC power supply. Eliminates the need for doorbell transformers and AC/DC Power converters used in the original design. One required for each meter. You'll need a short piece of DIN rail and two DIN rail...
Temperature probe tip, 1.5" Tri-Clamp, 1.38"/35mm probe length
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). The 1.38" (35mm) long probe can be attached directly into an instrument (not standard or...
Temperature probe tip, 2" Tri-Clamp, 6"/150mm probe length
Stainless steel probe body. Tri-Clamp (sometimes called Tri-Clover) probes are normally attached directly to plumbing or existing kettle fittings using a clamp and gasket (not included). Detachable connector with a spring lock. Cable sold separately. Includes water-resistant/splash-proof silicone temperature probe cap. Our...
Temperature probe tip, 1/2" NPT, 4" probe length
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). 4" long probe (measured from the back part of the threads...
Stainless steel male quick disconnect x 1/2" NPT male
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. The male end is simply a post with a locking groove...
Temperature probe tip, M14x1.5 Metric, 2" probe length
Stainless steel probe body. Metric (straight) thread probes are normally used directly in a kettle wall such as the Boil Kettle, resulting in a weldless installation. Simply punch a hole in your kettle wall and attach using the included stainless steel nut...
Stainless steel locknut, 1" NPS
Fits on heating element threads. Included in our Electric Brewery heating element assemblies (both pre-assembled and DIY kit).
Electric Brewery HERMS Coil, small size, 11.25" diameter, 9.5" high
Professionally manufactured by a US stainless tubing company using US sourced stainless steel, ready for use in your electric brewery setup. The longer 50 foot length ensures that heat transfer is maximized and the large 1/2 inch tubing minimizes flow...
50A Electric Brewery Control Panel for back to back batches (DIY Kit, 240V only, for international use)
Our control panel for producing up to 20 gallons of finished product per batch, back to back. DIY kit. You supply the tools. International version for 220-240V countries (United Kingdom, Australia, New Zealand, many parts of Europe, etc.). For more information...
Standard 30A Electric Brewery Control Panel (DIY Kit)
Our most popular control panel! Perfect for producing up to 20 gallons of finished product per batch. DIY kit. You supply the tools. A single element is used in both the boil kettle and hot liquor tank. The control panel...
16-14 gauge female quick disconnect terminal, blue (25 pack)
Fully insulated quick-disconnect terminal standard female, accepts 16-14 wire gauge. Used in 50A control panels to connect to the coil on 50A contactors. Included in our Electric Brewery Control Panel kits. Package of 25
Temperature probe tip, 1/4" NPT, 4" probe length
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/4" NPT thread (as well as 1/4" BSPP and BSPT). 4" long probe (measured from the back part of the threads to the...
50A Electric Brewery Control Panel for 30+ gallons (DIY Kit, 240V only, for international use)
Our control panel for producing more than 30 gallons of finished product per batch or to speed up your brew day by reducing heat times. DIY Kit. You supply the tools. Perfect for 1-3 bbl pilot systems. International version for...
12" handle
Large handle used for protecting components on the front of the control panel. Overall Length: 11-3/4" (298mm)Overall Height: 1-3/32" (28mm)Overall Diameter: 13/32" (10mm)Center to Center: 11-3/8" (288mm)Thread: 8-32 Sold individually, includes (2) 8-32x3/8" screws. Included in our Electric Brewery Control Panel...
50A Electric Brewery Control Panel for back to back batches (Pre-Assembled)
Our control panel for producing up to 20 gallons of finished product per batch, back to back. Pre-assembled and ready to use. A single element is used in the boil kettle and hot liquor tank, but both may be run...
50A Electric Brewery Control Panel for 30+ gallons (DIY Kit)
Our control panel for producing more than 30 gallons of finished product per batch or to speed up your brew day by reducing heat times. DIY Kit. You supply the tools. Perfect for 1-3 bbl pilot systems. For more information see...
Terminal strip, 8 position
8 Position dual row terminal strip, 20A/300V. Want to save some wiring work? Use a terminal strip jumper. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit.
50A ground bar, 7 terminal
7-terminal ground bar bus for easier grounding of components. Mounts with (2) 8-32 screws (included) to backplate of enclosure. Included in our Electric Brewery Control Panel kits.
Temperature probe tip, 1/2" NPT, 6" probe length
NPT (tapered) thread probes are normally attached directly to plumbing, or existing kettle fittings. Stainless steel probe body. Mounts into 1/2" NPT thread (as well as 1/2" BSPP and BSPT). 6" long probe (measured from the back part of the threads...
6 gauge ring terminal, #10 hole (10 pack)
6 gauge ring terminal with a #10 hole, uninsulated. Used to connect 6 gauge wire to shunt, SSRs, and other small screws. For connecting ground wire to panel stud, use 6 gauge ring terminal, #14 hole instead. Package of 10
10 gauge ring terminal, #10 hole, yellow (25 pack)
Ring terminal, vinyl insulated, accepts 12-10 wire gauge, for #10 stud. Used on all 10 gauge screw connections. For connecting to ground stud within control panels use 10 gauge ring terminal, #14 hole instead. Included in our Electric Brewery Control Panel kits, Standard...
2-pole fuse holder for 10x38mm fuses, 30A 600V
30A/600V midget-style 2-position fuse holder with screw down wire connectors for a solid connection. Use BLN (10x38mm) midget style fuses (sold separately). Panel Mountable30A/600VUL, ULr, CSA Approved3 in x 1.5 in x 1.25 in Included in our 50A Electric Brewery...
Stainless steel male quick disconnect x 1.5" Tri-Clamp
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. The male end is simply a post with a...
16x16x8" enclosure pre-punched and painted for Standard 30A Control Panel
Our kit enclosures are custom made for us and result in less work for you. There is no need to move the ground post, no need to seal and sand the bottom cable plate, and no need to prime and paint as the enclosure...
22-18 gauge #6 narrow spade terminal, red (25 pack)
Spade terminal, vinyl insulated, accepts 22-18 gauge wire, for #6 stud. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Package of 25
6 gauge ring terminal, 1/4" hole (10 pack)
6 gauge ring terminal with a 1/4" hole, uninsulated. Used to connect 6 gauge wire to ground posts inside the control panel. For connecting wires to the shunt, SSRs, and other small screws, use 6 gauge ring terminal, #10 hole...
Stainless steel female quick disconnect x 1/2" barb
Quick disconnects are (as the name would imply) connectors that can be connected and disconnected quickly. These seal very well (no drips at all) and support liquid flow in either direction. Mates with the male end to form a locking seal. The...
16x16x8" enclosure pre-punched and painted for 50A Control Panel for back to back batches
Our kit enclosures are custom made for us and result in less work for you. There is no need to move the ground post, no need to seal and sand the bottom cable plate, and no need to prime and paint as the enclosure...
10 gauge x 2 wire ferrule, yellow (10 pack)
Dual 10 gauge wire ferrule for use in DIN style wiring. Fits (2) 10 gauge wires, ferrule length of .47". Requires special DIN wire ferrule crimping tool. Package of 10
Chugger Mini Max TEFC pump, stainless steel head, center inlet, 115/230V (TCPSS-CI)
Tough little continuous-duty pump that can be non-stop for extended periods. Handles liquids up to 250° F and has a TEFC (Totally Enclosed Fan Cooled) dual voltage motor (user selectable 115VAC and 230VAC). Consider this pump over the other models primarily...
