Search
- 115 results
Extension cord for 120V pump with twist lock plug (L5-15R to L5-15P)
For use between 120V pumps with a twist lock plug and one of our Electric Brewery Control Panels. Industrial grade connector and plug instead of flimsy molded rubber that is easily damaged and deforms / melts when overheated. Twist locking...
Extension cord for 120V pump with regular non-locking plug (5-15R to L5-15P)
For use between 120V pumps with a regular non-locking plug and one of our Electric Brewery Control Panels. Industrial grade connector and plug instead of flimsy molded rubber that is easily damaged and deforms / melts when overheated. Twist locking for...
Extension cord for 240V pump with twist lock plug (L6-15R to L6-15P)
For use between 240V pumps with a twist lock plug and one of our 240V only Electric Brewery Control Panels meant for international use. Industrial grade connector and plug instead of flimsy molded rubber that is easily damaged and deforms /...
NEMA L5-15 (125VAC, 15A) twist lock electrical female connector
Make an extension cord for 120V pumps that have a locking plug by using this connector with our NEMA L5-15 (125VAC, 15A) twist lock electrical male plug and premium SJEOOW 14 gauge 3-conductor wire. Add optional 1/4" expandable braided sleeving and 3/8" black heat...
NEMA L6-15 (250VAC, 15A) twist lock electrical female connector
Make an extension cord for 240V pumps that have a locking plug by using this connector with our NEMA L6-15 (250VAC, 15A) twist lock electrical male plug and premium SJEOOW 14 gauge 3-conductor wire. Add optional 1/4" expandable braided sleeving and 3/8" black...
30A Electric Brewery Control Panel power cord (DIY Kit)
30A power cord for powering our 30A control panels. It plugs into a standard 4-slot North American dryer wall receptacle (240V/30A NEMA 14-30R with ground). DIY Kit (4 wires must be attached between the cord and plug using a screwdriver). A locking female connector is used...
50A Electric Brewery Control Panel power cord (DIY Kit)
50A power cord for powering any of our 50A control panels. It plugs into a standard 4-slot North American stove wall receptacle (240V/50A NEMA 14-50R with ground). DIY Kit (4 wires must be attached between the cord and plug using a screwdriver). A locking female...
50A Electric Brewery Control Panel power cord (Pre-Assembled)
50A power cord for powering any of our 50A control panels. It plugs into a standard 4-slot North American stove wall receptacle (240V/50A NEMA 14-50R with ground). A locking female connector is used on the control panel side for added safety. Conductors are...
30A Electric Brewery Control Panel power cord (Pre-Assembled)
30A power cord for powering our 30A control panels. It plugs into a standard 4-slot North American dryer wall receptacle (240V/30A NEMA 14-30R with ground). A locking female connector is used on the control panel side for added safety. 10 feet in length. Contact us...
NEMA L6-15 (250VAC, 15A) twist lock electrical male plug
Used on 220-240V pump cables and plugs into our 240V only Electric Brewery Control Panels meant for international use. Industrial grade and twist locking for safety. 3 wire. Available as an optional add-on when you purchase a 220-240V pump from us. ...
Premium SJEOOW 14 gauge 3-conductor wire, oil/water resistant, rubber coating, rated for outdoor use (Sold by the foot)
Perfect for pump cords. SJEOOW wire features a thermoplastic elastomer jacket which means that the cable remains more flexible than a standard (less expensive) cord. Rated to 300 volts and from -50 to 105 degrees Celsius. These cords are designed...
Electric Brewery heating element cord and plug assembly (250VAC, 30A)
Want to DIY but save a few steps? Use this pre-assembled heating element cord assembly. Features durable SJEOOW wire protected with expandable sleeving, with a tough industrial grade nylon L6-30 locking plug, and heat shrink tubing on the plug end. You supply...
Premium SJEOOW 10 gauge 3-conductor wire, oil/water resistant, rubber coating, rated for outdoor use (Sold by the foot)
Perfect for heating element cords or for 30A control panel power cords. SJEOOW wire features a thermoplastic elastomer jacket which means that the cable remains more flexible than a standard (less expensive) cord. Rated to 300 volts and from -50 to...
NEMA 5-15 (125VAC, 15A) electrical female connector
Don't want to cut the plug off your 120V pump and void the warranty? Make a patch cord to connect your pump to our control panels by using this connector with our NEMA L5-15 (125VAC, 15A) twist lock electrical male plug...
NEMA L5-15 (125VAC, 15A) twist lock electrical male plug
Used on 110-120V pump cables and plugs into our control panels. Industrial grade and twist locking for safety. 3 wire. Available as an optional add-on when you purchase a 110-120V pump from us. Need to extend your pump cord length? Use one...
22 gauge 2-conductor wire (Sold by the foot)
Perfect for wiring up the meters, power supplies, SSRs, and other locations where two small gauge conductors are required. Price is per foot.
White 10 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
Included in our Electric Brewery Control Panel kits (240V only, for international use). Price is per foot.
Green 10 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
Black 6 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
Included in our Electric Brewery Control Panel kits. Price is per foot.
Green 6 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
Included in our Electric Brewery Control Panel kits. Price is per foot.
White 14 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
Red 6 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
Included in our Electric Brewery Control Panel kits. Price is per foot.
Red 14 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
22 gauge 4-conductor wire (Sold by the foot)
Perfect for wiring up the XLR receptacles and other locations where more than two small gauge conductors are required. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
Black 10 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
Black 14 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
Red 10 gauge type T90/THWN/THHN wire, stranded (Sold by the foot)
Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is per foot.
Chugger 1.5" Tri-Clamp X-Dry (run dry protection) pump, stainless steel head, center inlet, 115V (TRI-XCPSS-CI-1)
Same pump as the now discontinued CPSS-CI-1, but with FDA Approved Run Dry Carbon Bearing Material and 1.5" Tri-Clamp (sometimes called Tri-Clover) connections. Pump should not be run dry on purpose. Tough little continuous-duty pump that can be non-stop for...
Temperature probe wire, bare, 3-conductor, Teflon™ coated (Sold by the foot)
3-conductor 24 gauge copper wire coated with Teflon™ can be used for RTD probe extensions or making your own cables. Rated to 400F. Price is per foot.
1/4" expandable braided sleeving, carbon/black (Sold by the foot)
Perfect for protecting 14 gauge SJEOOW wire such as pump cords. It is recommended that you purchase 20% more than the cord length you wish to cover to account for shrinking during installation. Price is per foot.
Electric Brewery temperature probe cable only (Pre-Assembled)
These cables are pre-assembled and come with a 3-pin disconnect at the probe end and a 3-pin female XLR connector at the control panel end. Includes two layers of sleeving, a stainless steel wire rope with 150lb break strength, and high...
NEMA L14-30 (125/250VAC, 30A) twist lock electrical male receptacle
Used as a power cord receptacle on a 30A control panel. Industrial grade and twist locking for safety. 4 wire. Grey.
1/8" expandable braided sleeving (Sold by the foot)
Perfect for protecting 24 gauge temperature probe wire and other smaller wiring. It is recommended that you purchase 20% more than the cord length you wish to cover to account for shrinking during installation. Included in our Electric Brewery temperature probe kits....
March pump, stainless steel head, center inlet, 115V (815-SS-C)
Tough little continuous-duty pump that can be non-stop for extended periods. Handles liquids up to 250° F. Comes standard with a non-locking plug with a 6 foot long cord. To use with our control panels make sure to upgrade to the L5-15 (125VAC,...
Chugger X-Dry (run dry protection) pump, stainless steel head, center inlet, 115V (XCPSS-CI-1)
Same pump as the now discontinued CPSS-CI-1, but with FDA Approved Run Dry Carbon Bearing Material. Pump should not be run dry on purpose. Tough little continuous-duty pump that can be non-stop for extended periods. Handles liquids up to 250°...
Temperature probe wire with locking connector, 3-conductor, Teflon™ coated
Bare 3-conductor temperature probe wire with 3-pin locking connector. Offered in 3 lengths (6', 8', and 12'). Teflon™ coated wire is rated to 400F. Already included in our temperature probe kits. Contact us for custom lengths. Does this cable work...
1/2" spiral wire wrap (Sold by the foot)
1/2 inch polyethylene expandable spiral cut wrap used to protect wire, hose or cable bundles from 3/8 inch to 4 inch diameter. Included in our Electric Brewery Control Panel kits and Standard 30A Electric Brewery Control Panel Wiring Kit. Price is...
NEMA L6-15 (250VAC, 15A) twist lock electrical female receptacle
Used as the 240V pump receptacle for international control panels. Industrial grade and twist locking for safety. 3 wire. White. Included in our Electric Brewery Control Panel kits meant for international use.
Stainless steel wire rope, 1x7 strand, 1/32" diameter, 150 pound break strength (Sold by the foot)
Adds protection to smaller diameter wiring. Included in our Electric Brewery temperature probe kits. Price is per foot.
Electric Brewery heating element assembly (Pre-Assembled, optional Tri-Clamp)
Our heating element assemblies feature UL/CSA listed industrial non-proprietary parts, a weatherproof box (boilover proof), and are simple to install. The heating element is optional as some people may already have one and/or purchased one separately. If you do not...
NEMA L6-30 (250VAC, 30A) twist lock electrical male receptacle
Can be used as a power cord receptacle on a 30A control panel meant for international use (240V only). Industrial grade and twist locking for safety. 3 wire.
NEMA L6-30 (250VAC, 30A) twist lock electrical male plug
Used on heating element cables and plugs into a control panel. Industrial grade and twist locking for safety. 3 wire. Included in our Electric Brewery heating element assembly (DIY kit).
NEMA L6-30 (250VAC, 30A) twist lock electrical female receptacle
Used as heating element receptacles on control panels. Industrial grade and twist locking for safety. 3 wire. White. Hole diameter: 2.125". Used in our control panels since summer/fall of 2023. If you require a replacement, best to measure to confirm....
NEMA L6-30 (250VAC, 30A) twist lock electrical female connector
Used on a power cord for a Standard 30A Electric Brewery Control Panel (DIY Kit, 240V only, for international use). This is the connector that plugs into the control panel. Industrial grade and twist locking for safety. 3 wire.
22 gauge female quick disconnect terminal, red (10 pack)
Fully insulated quick-disconnect terminal standard female, accepts 18-22 wire gauge. Used for connecting 18-22 gauge wires to 50A contactors (such as the volt meter signal in 50A panels). Included in our Electric Brewery Control Panel kits. Package of 10
65A terminal block jumper, 3-pole
3-pole jumper for 65A DIN rail mountable terminal block buses (sold separately). Screws included. Amperage Rating: 65AVoltage Rating: 600VApprovals: UL (Recognized) Already included in our 65A triple terminal blocks.
Pump with high temperature stainless steel housing, 3/4" NPT male center inlet, 1/2" NPT male outlet, 115VAC
Required: 2 Buy at: TheElectricBrewery.com (Worldwide shipping) Amazon.com (USA) Amazon.ca (Canada) Amazon.co.uk (Europe) More Beer! (USA) Ontario Beer Kegs (Canada) eBay (USA) Used in: Pumps (Qty: 2) We use and recommend pumps with stainless steel heads as they are much more...
Pump with high temperature stainless steel housing, 3/4" NPT male center inlet, 1/2" NPT male outlet, 230VAC
Required: 2 Buy at: TheElectricBrewery.com (Worldwide shipping) Amazon.com (USA) Amazon.ca (Canada) Amazon.co.uk (Europe) More Beer! (USA) Ontario Beer Kegs (Canada) eBay (USA) Used in: Standard 30A Electric Brewery Control Panel (240V only, for international use) (Qty: 2) 50A Electric Brewery Control...
